AUTH-0023-2 XC2xxx

When purchase please include xprog "Hardware ID"

Features

• Last update: 2020.02.16
• Compatible with XPROG-box software V6.3.5 or higher.
• Supported devices:
  
  • XC2060M-104F
  • XC2060N-40F
  • XC226xN-16F/24F/40F
  • XC228x-56F/72F/96F
  • XC228xM-56F/72F/96F
  • XC2336A-56F/72F
  • XC2336B-24F/40F
  • XC236xA-56F/72F/104F
  • XC236xB-24F/40F
  • XC27x7X (flash0...flash6)
• Programming interface: in-circuit (BootLoader).
• Supported adapters:
  
  • no additional adapters required

XC236xA-56

The on-chip Flash memory stores code, constant data, and control data. The 448 Kbytes of on-chip Flash memory consist of 1 module of 64 Kbytes (preferably for data storage, eeprom emulation) and 2 modules of 256 + 128 Kbytes (preferably for program code and data storage). Each module is organized in 4-Kbyte sectors. The uppermost 4-Kbyte sector of segment 0 (located in Flash module 0) is used internally to store operation control parameters and protection information and not inplemented in this software version.

Address area FLASH 0

Frequently used for program code and data storage. FLASH sector from 0xF000 to 0xFFFF reserved for control parameters and protection information and not inplemented in this software version.
  Address Range          Size
0x00000 - 0x3FFFF    256K bytes
 

Address area FLASH 1

Frequently used for program code and data storage

  Address Range          Size
0x00000 - 0x1FFFF    128K bytes

Address area FLASH 3

Frequently used for data storage and eeprom emulation.

  Address Range          Size
0x00000 - 0x0FFFF    64K bytes

XC236xA-72

The on-chip Flash memory stores code, constant data, and control data. The 576 Kbytes of on-chip Flash memory consist of 1 module of 64 Kbytes (preferably for data storage, eeprom emulation) and 2 modules of 256 + 256 Kbytes (preferably for program code and data storage). Each module is organized in 4-Kbyte sectors. The uppermost 4-Kbyte sector of segment 0 (located in Flash module 0) is used internally to store operation control parameters and protection information and not inplemented in this software version.

Address area FLASH 0

Frequently used for program code and data storage. FLASH sector from 0xF000 to 0xFFFF reserved for control parameters and protection information and not inplemented in this software version.
  Address Range          Size
0x00000 - 0x3FFFF    256K bytes
 

Address area FLASH 1

Frequently used for program code and data storage

  Address Range          Size
0x00000 - 0x3FFFF    256K bytes

Address area FLASH 3

Frequently used for data storage and eeprom emulation.

  Address Range          Size
0x00000 - 0x0FFFF    64K bytes

XC2060M-104, XC236xA-104

The on-chip Flash memory stores code, constant data, and control data. The 832 Kbytes of on-chip Flash memory consist of 1 module of 64 Kbytes (preferably for data storage, eeprom emulation) and 3 modules of 256 + 256 + 256 Kbytes (preferably for program code and data storage). Each module is organized in 4-Kbyte sectors. The uppermost 4-Kbyte sector of segment 0 (located in Flash module 0) is used internally to store operation control parameters and protection information and not inplemented in this software version.

Address area FLASH 0

Frequently used for program code and data storage. FLASH sector from 0xF000 to 0xFFFF reserved for control parameters and protection information and not inplemented in this software version.
  Address Range          Size
0x00000 - 0x3FFFF    256K bytes
 

Address area FLASH 1

Frequently used for program code and data storage

  Address Range          Size
0x00000 - 0x3FFFF    256K bytes

Address area FLASH 2

Frequently used for program code and data storage

  Address Range          Size
0x00000 - 0x3FFFF    256K bytes

Address area FLASH 3

Frequently used for data storage and eeprom emulation.

  Address Range          Size
0x00000 - 0x0FFFF    64K bytes

XC236xB-24, XC2336B-24

The on-chip Flash memory stores code, constant data, and control data. The 192 Kbytes of on-chip Flash memory consist of 1 module of 64 Kbytes (preferably for data storage, eeprom emulation) and 1 module of 256 Kbytes (preferably for program code storage). Each module is organized in 4-Kbyte sectors. The uppermost 4-Kbyte sector of segment 0 (located in Flash module 0) is used internally to store operation control parameters and protection information and not inplemented in this software version.

Address area FLASH 0

Frequently used for program code storage. FLASH sector from 0xF000 to 0xFFFF reserved for control parameters and protection information and not inplemented in this software version.
  Address Range          Size
0x00000 - 0x1FFFF    128K bytes
 

Address area FLASH 1

Frequently used for data storage and eeprom emulation.

  Address Range          Size
0x40000 - 0x4FFFF    64K bytes

XC2060N-40, XC2336B-40, XC236xB-40

The on-chip Flash memory stores code, constant data, and control data. The 320 Kbytes of on-chip Flash memory consist of 1 module of 64 Kbytes (preferably for data storage, eeprom emulation) and 1 module of 256 Kbytes (preferably for program code storage). Each module is organized in 4-Kbyte sectors. The uppermost 4-Kbyte sector of segment 0 (located in Flash module 0) is used internally to store operation control parameters and protection information and not inplemented in this software version.

Address area FLASH 0

Frequently used for program code storage. FLASH sector from 0xF000 to 0xFFFF reserved for control parameters and protection information and not inplemented in this software version.
  Address Range          Size
0x00000 - 0x3FFFF    256K bytes
 

Address area FLASH 1

Frequently used for data storage and eeprom emulation.

  Address Range          Size
0x40000 - 0x4FFFF    64K bytes